Smoke Shaft Vent

Thermadome Smoke Shaft vent Louvre

Suited for use as smoke shaft vents and internal inlet air vents in a smoke ventilation system, this automatic opening solution is powered by 24V CDC actuators with a drive open, drive close operation. They can be mounted within an aperture or curtain wall system, or flush mounted into a finished opening in most industrial, commercial and residential properties. Suited for use as smoke shaft vents and internal inlet air vents, this solution is powered by 24V CDC actuators with a drive open, drive close operation. They can be mounted within an aperture or curtain wall system, or flush mounted into a finished opening in most industrial, commercial and residential properties.

• Fully certified to BS EN12101-2
• Available in a wide range of bespoke widths and heights
• Flush centre pivot louvres
• Synchronised operation by an enclosed maintenance-free rack and pinion mechanism
• Highly impact-resistant in open and closed positions

Thermadome smoke shaft vent door

A discrete smoke vent solution for use where smoke shafts provide ventilation in lobbies and corridors. Opening to 90° in under 60 seconds, it provides 0.6m2 and 1.0m2 free vent areas for use with mechanical and natural smoke shaft installations.

• Fully certified to BS EN12101-2
• Standard sizes of 0.6m2 and 1.0m2 available from stock
• Flush mounted for unobtrusive finish
• Fully welded four-sided rigid frame construction in steel with full-length concealed continuous hinge
• Supplied paint-ready or powder coated
• 36dB acoustic reduction

Thermadome Roof Louvre vents – For Horizontal applications

A specialist Louvre roof smoke vent for large roofs or those with high wind loads. Particularly suited for head of smoke shaft ventilators, this solution is resistant to impact when open and closed and can be installed in most roof applications. Thermadome roof louvres are particularly suited to roof applications or areas when the footprint of the smoke vent needs to remain as small as possible and there may be insufficient space for a single or double leaf type opening units.

• CE marked and fully certified to BS EN12101-2
• Different blade options available
• Opening to 90° providing maximum aerodynamic efficiency
• Can be integrated into BMS or supplied with dedicated controls
• Minimal energy consumption
• Supplied in various standard sizes or custom built for specific requirements
• Practical smoke vent soloution
• Made to measure available up to 2500 x 3800mm
• Daylight option available using polycarbonate or multi-wall blades
• High security

Thermadome Louvre vents – For vertical applications

Solid blade smoke vent louvres are commonly used in areas that do not require natural light and smoke ventilation requirements are needed. Solid blade louvre smoke vents can be used in high wind environments and are impact resistant in open and closed positions. Available fully certified to BS EN12101-2 and electrically operated to open to 90 degrees in under 60 seconds. Available in standard and bespoke sizes the aluminium blades and framework can be delivered mill finish, anodised or polyester powder coated. Options are also available to offer low-level fresh air and comfort ventilation when required, perfect for releasing heat and smoke from areas such as corridors, stairwells.

• Insulated blades
• Sound reduction with acoustic insulation
• Opens to 90 degrees within 60 seconds
• CE Marked and fully certified to BS EN 12101-2